Converge Admin Login — Find Your Brand First: 192.168.100.1 (Huawei) or 192.168.1.1 (ZTE, FiberHome)

The Fork — Converge Modems by Brand: Door, Pair, Status

Log In in 3 Steps

1. Step 1 — Connect

   Connect to your Converge WiFi (names like Converge_2.4GHz / Converge_5GHz, or your sticker’s SSIDs) or by LAN cable.

2. Step 2 — Open Your Brand’s Door

   Type your brand’s address from the fork table in the address bar (http:// is fine), not a search box. On a phone, rotate to landscape; these panels were built for wide screens.

3. Step 3 — Enter Your Brand’s Pair, Typed by Hand

   Use the matrix below — and type it, don’t paste: a trailing space from copy-paste is a documented cause of failure, especially on ZTE.

The Pair Matrix — Huawei Stable, ZTE Layered

ZTE Owners: the Ground Moves — the Three-Level Ladder, Batch Variance, and Converge’s Rotations

ZTE is where Converge login help usually goes wrong, because the honest answer is layered:

The Ladder (Try in This Order)

1. user / user — the basic account. Confirmed working by F670L owners; opens the everyday settings.
2. operator / operator@123 — the middle account. Confirmed working alongside user/user in subscriber testing.
3. admin / Converge@zte123 — the standard admin account, listed as the F670L’s admin access in Google’s AI Overview and confirmed working by many owners — including on the newer F1611A, and in reports running into 2026. One scope note that explains half the arguments about it: an independent 2026 credential table documents this pair for the F670L’s older firmware — it is the long-installed base where the pair is stable, and firmware is one of the things that can move it (see the rotation note below).

The variance is real. On some units — including the F670L whose owner tested all three in public — the admin pair fails while user and operator work. Batch and firmware differ; a pair failing on your unit does not make it “wrong,” and a pair working for a commenter does not guarantee yours. The secondhand market shows the same truth from the other side: used and reflashed F670Ls are sold across Philippine marketplaces with the admin pair above advertised as their working GUI login — on a unit like that, whatever the seller left in place IS the credential, and it is usually this one.

The Sticker Has the WiFi Key — Not Always the Admin Pair

Photograph the sticker (bottom/back of the modem): it carries the default WiFi names and the factory WiFi password, labelled WLAN Key. What it often does not carry on Converge units is the admin pair — that frequently lived only on the box, and boxes get lost. That asymmetry is why the published pairs and ladders on this page matter more for Converge than for PLDT or Globe: they are the standard route back in, not a shortcut.

Bida Fiber and YOTC — Same Network, Same Modems, Same Doors

If your bill says Bida Fiber or YOTC: both run on Converge’s network, and the modems issued are from the same Huawei/ZTE/FiberHome families. There is no separate Bida or YOTC login door and no separate credential list — identify the brand printed on your modem and use its row in the fork table. (If your unit’s branding differs from the modem’s maker, the maker is the row that counts.) Forum threads asking for a “Bida admin password” are still active in 2026 and still go unanswered in public for exactly this reason: there is no Bida-specific pair to give — only the modem maker’s rows above, and Converge support behind them.

Here to Change the WiFi Password?

You’re one login away: once you’re in, Huawei owners use Fast Setting (both bands, one screen) and ZTE/FiberHome owners use their network/security screens — the full walkthrough, per vendor, with the eviction sequence for unwanted devices, is our Converge WiFi password guide.

Locked Out? The Converge Rescue Order — Support Before Reset

1. Type, don’t paste. Trailing spaces have defeated more ZTE owners than any rotation. Re-enter the pair by hand.
2. Work the ladder in order (ZTE) or the failure order (Huawei: right door → Ep tiers → changed pair). Note which rungs open — that tells you your unit’s state.
3. Ask who changed it. Household member, installer, or a previous guide-follower (the Fast Setting wizard itself teaches changing the admin password).
4. Call Converge — (02) 8667-0850 (the hotline published in TechPilipinas’s guide). Go in knowing support will not hand out rotated ZTE admin credentials (per the community moderator) — but line-side and provisioning problems are theirs, and a unit whose credentials were rotated is a legitimate support case.
5. Reset — last, and on Converge it carries a real price. Holding the recessed Reset button (~5 seconds, until the lights blink) restores factory pairs — and wipes every custom setting. Worse, Converge subscribers and the community moderator warn that the ONT’s configuration may not automatically come back, and a reset can cost you the connection itself until Converge re-provisions it. On PLDT or Globe, reset is the standard last resort; on Converge, it is the risky one. Exhaust 1–4 first.